Non-contact hot plate welders allow to weld the cristalline pastic material parts with clean outer view and high weld strength.

Cosmo System Corporation
homeproductsabout usnewscontact us
Home > Products > Hot Plate Welders < Non-contact Type Hot Plate Welders
Non-contact heating is suitable for thin parts and materials includes glass fibers.
Non-contact hot plate welders are able to heat up the weld area without contacting of welded part and heater platen.
When the plastic parts which includes glass fibers are welded by contact type hot plate welder, the burnt glass are bonded to heater platen even if Teflon coating is used on the heater platen.
Our original special heaters are able to heat up the plastic parts by over 600 degree Celsius temperature, and melt welded area.
We can supply any type of the press system, but we stronglly recommend our servo driven machine for non-contact hot plate welding because it provide short cycle time, precise control, and higher weld strength which is caused by short down phase during heating phase and clumping phase.

Large servo driven non-contact hot plate welder Large tyep servo controlled non-contact hot plate welder
- Servo controlled horizontal press system
- The velocity and clumping force of each tool platen are controlled indivisually.
- Actual force measurement function by precision force sensor.
- Distance controlaccuracy:+/- 0.01mm
- User friendlly color touch panel controller
- PID controlled heater unit with 3 heating zone.
- Heater platen size:(W)600~(D)400mm
- Tool platen stroke: 400mm (each) - Special heater for high temperature: Max. 700 degree Clsious
- Max. clumping force: 45000 Newton
- Weld program storage: Max.30
- Water cooled tool platen
- Weld limit feature
- Parts vcuum function
- Safety light curtain

- This system is custom-made, and we design and build the suitable system to match with your request.

Small type servo controlled hot plate welder Small type servo controlled non-contact hot plate welder
- Servo controlled upper/lower tool platen and heater platen
- The velocity and clumping force of each tool platen are controlled indivisually.
- Actual force measurement function by precision force sensor.
- Distance controlaccuracy:+/- 0.01mm
- User friendlly color touch panel controller
- PID controlled heater unit with 3 heating zone.
- Heater platen size:(W)100~(D)100mm
- Tool platen stroke: 150mm (each) - Special heater for high temperature: Max. 750 degree Clsious
- Max. clumping force: 5000 Newton
- Weld program storage: Max.20
- Water cooled tool platen
- Weld limit feature
- Parts vcuum function
- Safety light curtain

- This system is custom-made, and we design and build the suitable system to match with your request.

Bench top type non-contact hot plate welder Bench top type non-contact hot-plate welder
- Alternately production feature
- Color touch panel controller
- Weld program storage: Max.10
- Pneumatic cylinder drive press system
- Heater size: (W)100~(D)100mm
- Weld distance monitoring function
- PID controlled heater unit with 3 heating zone.
- Special heater for high temperature: Max. 900 degree Clsious
- Water cooled tool platen
- Weld limit feature
- Parts vcuum function

- This system is custom-made, and we design and build the suitable system to match with your request.

contact us

Home- Site Map - Japanese Page Home
Copyright (C) Cosmo System Corporation. All right reserved.